Sprays of dirt flew out of a soil box that held a retaining wall as it violently shook from a simulated 7.4 magnitude earthquake. The wall was put to test recently by engineers at the UC San Diego Englekirk Structural Engineering Center, which has the largest outdoor shake table in the United States. During the first series of tests, led by Dawn Cheng, a UCSD engineering alumna and now a civil engineering professor at UC Davis, researchers investigated the seismic response of a semi-gravity reinforced concrete cantilever wall. California has thousands of miles of these types of retaining walls on highways, roads, bridges and oceanside bluffs that have withstood earthquakes in the past. However, the seismic design of these walls has not been extensively developed. The outcome of this research, funded by Caltrans, will ensure that future retaining wall systems are designed to a higher performance standard and existing systems are upgraded and retrofitted to offer satisfactory performance to provide a safe and mobile transportation system in California.
Dawn Cheng, a UCSD engineering alumna and now a civil engineering professor at UC Davis, is working with Caltrans to come up with improved seismic designs for retaining walls across California.
(Photo Credit: UC San Diego)
Retaining walls – mostly made of concrete and steel – are normally used to support traffic loads and to create more of an abrupt change in elevation than a slope typically can.
"The main objective is trying to come up with a better understanding by observing how these structures behave and what kind of failure we can expect during an earthquake and to obtain some of the performance data so we can come up with better analytical models and design guideline methodologies," Cheng said. "We also want to look at the behavior of the structure when the soil is interacting with the system under earthquake shaking."
During the series of shake tests, no significant damage was observed in the retaining walls themselves, but the sound wall during the second set of tests had severe cracking near the bottom section, Cheng observed.
Engineers tested two types of retaining wall systems -- one without a sound barrier (foreground) and one with a sound wall (background) during a series of rigorous simulated earthquake tests at UCSD's Englekirk Structural Engineering Center, which has the largest outdoor shake table in the world.
(Photo Credit: UC San Diego)
"A lot of the sound walls are connected to the retailing walls. The design of that is critical because you are handling a bigger structure. The behavior is different," she said. "A lot of the retaining walls are supporting the sound walls in the field on the highways and overpasses. The performance under a dynamic earthquake is different when you have a sound wall on top because of the additional mass that changes the weight and stiffness of the system. In an earthquake you have to take that into account during the design process."
This project is unique, Cheng said, because it is the first comprehensive system level earthquake simulation test of a full-scale interactive soil-retaining wall structure supporting a sound wall. "UC San Diego has one of largest and most unique testing facilities in the world," she said. "The Englekirk Center has all the state-of-the-art testing facilities and there is a lot of technical support. The other reason this site was unique is because it has a large Caltrans funded laminar soil box and a soil pit on the site. UCSD is also the place where I did my Ph.D. research".
The research performed by Cheng and her colleagues will give Caltrans the opportunity to check its current retaining wall designs and input any necessary changes, according to Kathryn Griswell, ERS Specialist for Caltrans' Office of Design & Technical Services.
"This is a brand new modification and it's time to find out how it behaves under an earthquake," Griswell said.
"These types of walls rarely fall down and cause hazards or loss of lives or other safety issues. Normally what we have to deal with are maintenance issues and costly repairs from earthquakes so we're looking to modify the designs whenever necessary to keep costs down."
A semi-gravity reinforced concrete retaining wall backs against a soil box as it undergoes a series of violent simulated earthquakes on the shake table at the UCSD Englekirk Structural Engineering Center.
(Photo Credit: UC San Diego)